Canon PIXMA iP90 Quick Start Manual page 83

Problem
"Error No.: 300"
"Error No.:1700"
"Error No.:2001"
Have you replaced
an ink tank with a
new one? message is
displayed
Downloaded from ManualsPrinter.com Manuals
Possible Cause
Printer not ready If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing.
Printer not properly Ensure that the printer is securely connected to the computer.
connected
Your printer name is 1. Select Applications from the Go menu.
not displayed in the 2. Double-click the Printer Setup Utility icon in the Utilities folder.
Printer List of If you are using an OS other than Mac OS X v.10.3, double-click the Print
Printer Setup Utility Center icon.
(or Print Center) 3. Ensure that iP90 is displayed in the Printer List.
If iP90 is not displayed in the Printer List, reinstall the printer driver.
Waste ink absorber The printer has a built-in waste ink absorber to hold the ink used during print
almost full head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the RESUME/CANCEL button to clear the error so you can continue
printing. Before the waste ink absorber becomes completely full, contact the
Customer Care Center.
A specified period Disconnect the camera cable, press the RESUME/CANCEL button on the printer
of time has elapsed and reconnect the cable.
without receiving a
If the error is still unresolved, there is a possibility that you are using a digital
response from the
camera or digital video camcorder that is not supported by this printer. Use a
digital camera/The
digital camera or digital video camcorder compatible with this printer.
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
If the ink tank has
been replaced with
a new one
Click Yes to reset the ink counter.
See "Resetting the Ink Counter"
If the ink tank has Click No on the dialog box described above.
been removed for a
You can choose the option to disable the diaplay of this confirmation message.
certain period (the
1. Ensure that the printer is turned on and open the Printer Properties dialog
ink tank has not
box.
been replaced)
2. Click the Maintenance tab and then click Low Ink Warning Setting.
3. Clear the check box of Display a confirmation message of ink tank
replacement and click Send.
Note If you are using a switching hub or other device, disconnect the
printer and reconnect it directly to the computer and try printing
again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Note If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.
on page 64.
Troubleshooting
Try This
79