Table of Contents
Advertisement
2.
FUNCTIONAL CHARACTERISTICS
2.1
CONTROL PANEL
ON/OFF KEY [S0]
Switches the dishwasher ON and OFF.
When the LED [LD0] lights, this means that the appliance is switched on.
PROGRAMME AND OPTION KEYS [S1 S2 S3 S4 S5 S6]
2.1.1
Used to select a washing programme and the desired options (if featured).
Each key corresponds to a specific programme or option (Delay, ½ Load).
Each key features a LED which switches on and off when the key is pressed.
Each type of dishwasher may feature from 3 keys (minimum) to 6 keys (maximum).
Keys [S1 S2 S3] are featured on all models, since these are used for special functions by
Service engineers.
2.1.2
CYCLE PHASE LEDs [LD9 LD10 LD11]
These LEDs light during the various phases of the washing cycle.
[LD9]
[LD10]
[LD11]
The LEDs light as follows:
Program selection
Programme execution -
End of cycle
2.1.3
INDICATOR LEDs [ LD13- LD14]
These LEDs light to indicate the corresponding functions.
[LD13] - SALT
[LD14] - RINSE-AID
These LEDs light during the various phases as follows:
Programme selection
Programme execution
These LEDs indicate the following:
[LD13]
[LD14]
TSE-P 02.01 LF
- WASHING
- DRYING
- END OF CYCLE
-
the two LEDs [LD9 LD10] flash simultaneously.
only one LED [LD9] or [LD10] relative to the current phase of the
cycle remains lit.
-
only one LED [LD11] remains lit; the remaining LEDs are unlit.
-
the LEDs light (fixed).
-
the LEDs remain unlit.
-
the salt required for regeneration requires topping up.
If the regeneration level is set to [ 0 ] (no regeneration), this LED
remains unlit at all times.
-
the rinse-aid liquid requires topping up.
7/35
599 34 60-32
Advertisement
Table of Contents
