Advertisement
NOTE: If you have more than 1
fan with a remote, you will have
to change the DIP switch settings
located above the battery of the
remote. There are no DIP switch-
es on the fan. Only change the
remote DIP switches.
FAN REVERSE
(Press once to
change direction of
the fan)with fan
running.
Pressing the light delay but-
ton activates the light delay
function. The light will auto-
matically shut off after 1
minute.
Fan speed control
FAN SPEED
LIGHT DIMMER
offpress once quickly while light is on. To dim light hold down button "light
dimmer". The light will cycle from bright to dim to bright until button is released.
Light willmaintain last setting if turned off. You can see the percentage on the dis-
FORWARD/REVERSE
for remote to change rotation direction with fan running. The fan will come to a
complete stop and then run in the opposite direction. This process may take 20-30
Depress "#1 bar is for highest speed.The #7 bar is for the
lowest speed.
To turn light on, press light dimmer once quickly. To turn
play screen.
Depress reverse button and allow a few seconds
seconds.
LIGHT DELAY
When the low battery sign
is shown on the LCD dis-
play, replace a new bat-
tery.
Memory (Saves
the stored set-
tings before
turned off.)
LIGHT ON/OFF SET-
TING AND DIMMER
(Press and hold to
dim light infinitively)
FAN OFF SETTING
(Turns fan off only)
Advertisement
