Table of Contents
Advertisement
NOTE: If you have more than 1
fan with a remote, you will have
to change the DIP switch settings
located above the battery of the
remote. There are no DIP switch-
es on the fan. Only change the
remote DIP switches.
FAN REVERSE (Press
once to change direction
of the fan)with fan run-
ning.
Pressing the light delay but-
ton activates the light delay
function. The light will auto-
matically shut off after 1
minute.
FAN SPEED
LIGHT DIMMER
offpress once quickly while light is on. To dim light hold down button "light
dimmer". The light will cycle from bright to dim to bright until button is
released. Light willmaintain last setting if turned off. You can see the percentage
FORWARD/REVERSE
for remote to change rotation direction with fan running. The fan will come to
a complete stop and then run in the opposite direction. This process may take
© 2011 Monte Carlo Fan Company
Fan speed control
Depress "#1 bar is for highest speed.The #7 bar is for the lowest
To turn light on, press light dimmer once quickly. To turn
on the display screen.
Depress reverse button and allow a few seconds
20-30 seconds.
LIGHT DELAY
speed.
7
When the low battery
sign is shown on the
LCD display, replace a
new battery.
Memory for fan speed.
Press "M", fan will run
at the speed as last
setting if it was turned
off by remote con-
troller
LIGHT ON/OFF SET-
TING AND DIMMER
(Press and hold to
dim light infinitively)
FAN OFF SETTING
(Turns fan off only)
4/20/2012
Advertisement
Table of Contents
