Monte Carlo Fan Company 5DI52XXD-L Series Owner's Manual And Installation Manual

Monte Carlo Fan Company 5DI52XXD-L Series Owner's Manual And Installation Manual

Advertisement

Owner's Guide and Installation Manual
5DI52XXD/5DI52XXD-L Series Fan
UL Model No. : 5DI52
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
8.5 kgs
18.7 lbs
Total fan weight with light

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5DI52XXD-L Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Monte Carlo Fan Company 5DI52XXD-L Series

  • Page 1 Owner’s Guide and Installation Manual 5DI52XXD/5DI52XXD-L Series Fan UL Model No. : 5DI52 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8.5 kgs...
  • Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 3 Align the hole in the Downrod with the hole in Place downrod into fan yoke. the Yoke. Insert the Pin through the Yoke and Downrod until the point appears on the other side. © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 4 Tighten the knurled nuts Note: Flushmount is not available securely. The canopy should adjust for with vaulted ceiling. any irregularity in the ceiling or Outlet box. © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 5 Tighten screws se- position. Install the other 2 screws included side of the outlet box and ungrounded conductor on the in hardware bag and tighten all 4 securely. curely. other side of the outlet box. © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 6 If the reverse switch is set in the with the correct wattage bulbs, turn the and twisting clockwise till tight. middle position, fan will not operate. power on. © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 7 Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 8/13/2013...
  • Page 8 Apr.2013 May.2013 CUL requirement Aug.2013 dual mount...

Table of Contents