Table of Contents
Advertisement
Quick Links
Warning: This fan uses dimmable remote
controller. Do not install light kit with SBCFL
(Self-Ballasted Compact Fluorescent Lamp)
on this fan.
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
Owner's Guide and Installation Manual
5DCR52XX Series Fan
UL Model No. : AC-560DC
RETAILER NAME:
10 kgs
22 lbs
Total fan weight
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5DCR52EP
Summary of Contents for Monte Carlo Fan Company 5DCR52EP
- Page 1 Owner’s Guide and Installation Manual 5DCR52XX Series Fan Warning: This fan uses dimmable remote controller. Do not install light kit with SBCFL UL Model No. : AC-560DC (Self-Ballasted Compact Fluorescent Lamp) on this fan. Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER:...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 4/20/2012...
- Page 3 Install the two thumbscrews to Tighten both yoke set screws to fur- Next,insert clevis pin through yoke secure the yoke cover. Tighten ther secure downrod. and downrod and secure with cotter securely. pin. © 2011 Monte Carlo Fan Company 4/20/2012...
- Page 4 Place blade onto blade bracket with Place the gasket onto the blade Place blade onto blade holder. gasket. bracket as shown above. Install 3 screws and washers per blade and tighten securely. Repeat for all 5 blades © 2011 Monte Carlo Fan Company 4/20/2012...
- Page 5 2 provided. Tighten screws securely. screws securely. Remove the 3 screws on the switch Install the switch housing using the housing plate and save. three screws previously removed. © 2011 Monte Carlo Fan Company 4/20/2012...
-
Page 6: Special Note
It is a normal performance of this fan and it will take for few seconds to run this operation. 5. If fan or light isn't working, reset the power ( turn power off and then turn it back ) and redo the learn function. © 2011 Monte Carlo Fan Company 4/20/2012... -
Page 7: Fan Speed
Depress reverse button and allow a few seconds for remote to change rotation direction with fan running. The fan will come to a complete stop and then run in the opposite direction. This process may take 20-30 seconds. © 2011 Monte Carlo Fan Company 4/20/2012... -
Page 8: Troubleshooting
Make sure main power is turned off before entering switch housing. Warning: This fan uses dimmable remote controller. do not install light kit with SBcFL (Self-Ballasted compact Fluorescent Lamp) on this fan. © 2011 Monte Carlo Fan Company 4/20/2012... - Page 9 Apr.2012 New format Sep.5.2012 Up date about learn function setting...
Need help?
Do you have a question about the 5DCR52EP and is the answer not in the manual?
Questions and answers