Oki C3200n Service Manual page 156

LCD (English)
I I
( means no display in upper line)
CANCELING JOB
(BUFFER FULL)
CANCELING JOB
(JAM)
I I
WARMING UP
I I
OPTIMIZING TEMP
I I
POWER SAVE
I I
ADJUSTING COLOR
I I
ADJUSTING DENSITY
I I
ADJUSTING DENSITY
I I
ORDER * TONER
I I
* WASTE TONER FULL.REPLACE
TONER
PRESS ONLINE SW
INVALID DATA or TIMEOUT
42615101TH Rev.8
Ready
Attention
LED LED
Blink Varies Job cancelled because the log saving area in printer is
running out and "Job cancelled when log full occurs" is
set. (Related to JobAccount)
Job cancelled and the data is being discarded till the end
of the Job because JAM occurs when "JAM RECOVERY
" is set to OFF.
Varies Varies Warming up.
Varies Varies Because the drum temperature is high, printing is
temporarily suspended. Or, the printer is waiting for
implementation of heat measure for media switch from
narrow paper to wide paper.
Varies Varies A printer is in power save mode. Displayed in a combina-
tion of other message in the first line.
Varies Varies Auto registration adjusting in progress
Varies Varies Auto tone adjusting in progress
Varies Varies Auto density adjusting in progress
Downloading PU firmware (Displayed messages are
output by the PU firmware.)
Varies ON Toner low. Displayed in a combination of other message
in the first line.
If "LOW TONER=STOP" is set in menu, ATTENTION
LED blinks and the printer shifts to Off-line. When a user
presses On-line switch, ATTENTION LED (stops blinking
and) lights on and printing can continue until TONER
EMPTY.
Y
M
C
K
This message is also displayed when * waste toner box
is near full.
Varies ON The printer can still print. Allows printing about 50 pages
of A4 size at 5% density, then stops with Waste Toner
Full Error(414,415,416) again. The LCD message
indicates that the Waste Toner box is full.
Y
M
C
Varies Varies Invalid data was received. Press the On-line switch and
eliminate the warning.
Displayed when unsupported PDL command is received
or a spool command is received without HDD.
Also displayed when data reception has been
suspended for more than the period specified by WAIT
TIMEOUT in SYS CONFIG MENU. (PX724)
Oki Data CONFIDENTIAL
Description Level
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Warn-
ing
Warn-
ing
Warn-
ing
156 /