Oki C3200n Service Manual page 125

Category
FUSE KEEP MODE
PERSONALITY
(C5400)
42615101TH Rev.8
Item(1st Line) Value(2nd Line) DF
FUSE KEEP MODE EXECUTE
PCL ENABLE
DISABLE
IBM PPR III XL ENABLE
DISABLE
EPSON FX ENABLE
DISABLE
PS3 EMULATION ENABLE
(PX725) DISABLE
ESC/ P ENABLE
DISABLE
HP-GL/2 ENABLE
DISABLE
PCL XL ENABLE
DISABLE
Function
By pressing the ENTER key, a
command is issued from CU to PU and
the device becomes ON LINE. This
mode is used when confirmation of
operation is needed using new
consumables as the factory default at
the users.(When comparing to the old
products etc.)
The fuse of the new consumables is
not cut if this mode is used, and also
operation count is not added to values
of the old one. This mode should be
finished in power-off and make sure to
turn off the power after working in
FUSE KEEP MODE since it will be
invalid in next power-on.
* Changes the default PDL language for
each brand. PDLs that are disabled in
this menu will not be displayed on User
*E
Menu's or Admin Menu's
*J
PERSONALITY.
*E
When print data in the PDL language
*J
set to DISABLE is received, the printer
will display INVALID DATA and discard
*
received data.
PX725: Cannot disable PS3
(PostScript). Same as PX711/
*
713.(Only menu is implemented for
future expansion.)
When PCL is set to DISABLE, the data
*JE
of HP-GL/2 or PCL XL will not be
*JE
printed even though it is set to
ENABLE. The data is processed as
invalid.
Setting ENABLE to IBM PPR III XL or
EPSON FX in Japanese brands will
not assure the normal operation.
Setting ENABLE to ESPC/ P in
overseas brands will not assure the
normal operation.
Oki Data CONFIDENTIAL
125 /