Installing The Front Panel - Miele ESW 6380 Installation Instructions Manual

Installing the front panel

ESW 6380 FB
28
The front panel must be at least 3/4" (19 mm) thick and
made of heat resistant material 140° F (60° C). The front
panel, including handle, must not exceed 11 lb (5 kg) in
weight.
^ Attach the handle to the front panel using countersunk
screws.
^ Remove the screws from the left and right sides of the
drawer front and carefully lift the control panel out. Be
careful not to pull on or damage the power cord.
^ Remove the two screws on the inside of the front and
remove the panel from the front of the drawer.
^ Pre-drill the custom front panel (see illustration).
C 3/8" (10 mm), t = 3/8" (10 mm)