Operation; Overview Of The Keypad; Operating Instructions; Weighing - KERN EMB Operating Instructions Manual

7 Operation

7.1

Overview of the keypad

Key
7.2

Operating instructions

7.2.1 Weighing

• The balance is switched on by pressing the
• The balance performs auto-diagnostics (for 2 s) and then displays "0".
• If the weighing object is heavier than the weighing range the display indicates
"E" (=Overload).
• The balance is switched off by pressing the

7.2.2 Taring

• Place tare cup on the weighing plate and press
tion changes now to "0".The weight of the cup is now memorised.
• Fill weighing object in the cup, read measuring value.
• By pressing
in the display.
The taring procedure can be repeated several times, for instance to produce a mix-
ture of several components.
The limit is reached when the total weighing range has been used.
After removal of the tare cup the total weight appears as a negative value with „-„
mark.
EMB-BA-defsi-0522
Pressed briefly
Switching the balance on
Tara-Function
Switching the balance off
key, after the terminated weighing operation "0" appears again
Pressed for 10 sec
Unit changing
Adjusting function
key.
key once.
key. The weighing indica-
23