Underfloor Weighing - KERN EMB Operating Instructions Manual

6.7 Underfloor weighing

Objects which, because of their size or shape, cannot be put on the scale, can be
weighed by means of underfloor weighing.
Proceed as follows:
•
Switch off the balance.
•
Turn the balance over.
•
Open the cover plate (1) on the base of the balance.
•
Hang on the hook for underfloor weighing (2).
•
Place the balance over an opening.
•
Hang the item to be weighed on the hook and carry out weighing.
1
Fig. 1: Setting up the balance for underfloor weighings
• For the underfloor weighing use only the original hook of KERN.
• Take care that all hanged items are stable enough to hold the goods which you
wish to weigh (!!Danger of breaking!!).
• Never hang goods more than the maximum permitted weight
(!!Danger of breaking!!).
Always make sure that there are no living beings or materials below the load that
could be injured or damaged.
After completing the underfloor weighing, the opening in the floor of the balance
must be closed again (dust protection).
22
! CAUTION
NOTE
!
2
EMB-BA-defsi-0421