Remote Operation - Panasonic KX-TG7513C Operating Instructions Manual

TG75xxC(e).book Page 39 Monday, January 18, 2010 9:32 AM
played except when playing back
from the message list.
*2 When you play a message from the
message list, the unit stops message
playback and the display goes back to
the message list.
*3 To resume playback:
{V}/{^}: "Playback" i {SELECT}
*4 You can also erase as follows:
{ERASE} i {V}/{^}: "Yes" i
{SELECT}
Calling back (Call Display
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1
Press {PAUSE} during playback.
2
{V}/{^}: "Call back" i
{SELECT}
Editing the number before calling
back
1
Press {PAUSE} during playback.
2
{V}/{^}: "Edit & Call" i
{SELECT}
3
Press {EDIT} repeatedly until the
phone number is shown in the
desired format (page 35). i {C}
Erasing all messages
1
{MENU} i {#}{3}{2}{5}
2
{V}/{^}: "Yes" i {SELECT} i
{OFF}

Remote operation

Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
Answering System
unit's voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is "111".
Important:
L To prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
1
{MENU} i {#}{3}{0}{6}
2
Enter the desired 3-digit remote
access code.
3
{SAVE} i {OFF}
Deactivating remote operation
Press {*} in step 2 on "Remote access
code", page 39.
L The entered remote access code is
deleted.
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit announces the number of
new messages.
3
Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 40).
4
When finished, hang up.
Note:
L You can also leave a message just as
any outside caller can. After the
greeting message starts, press {*} to
39