Notes On Operating Your Components - Sony RM-VL900T Operating Instructions Manual

Operating Your Components
with the Remote Commander
(continued)
Notes on operating your
components
When you use a double cassette
deck
1 If the remote control for your
deck has a Deck A/B select
control, the
Commander has the
corresponding function.
2 If you cannot select Deck A/B
with the button, first set the
number code for either one of
the decks, and
•set the function controls for
the other deck to other free
buttons (for example, the
Number buttons) using the
Learning function (page 15),
•assign the other deck to
another Component Select
button (page 32).
GB
14
button on your
or
About the input select of a TV
Each time the t button is
pressed, the input is changed in
order. It is also possible to select
directly as follows when you are
connecting more than two VCRs.
"t" + "0": TV tuner
"t" + "1": VIDEO1
"t" + "2": VIDEO2
"t" + "3": VIDEO3
"t" + "4": VIDEO4
"t" + "5": VIDEO5
"t" + "6": VIDEO6
If the above operations do not
work, programme the remote
control signals of your component
to the Commander using the
Learning function (page 15).
About the input select of a VCR
Each time the t button is
pressed, the input is changed in
order. It is also possible to select
directly as follows.
"t" + "0": Tuner
"t" + "1": LINE1
"t" + "2": LINE2
"t" + "3": LINE3
"t" + "4": LINE4
"t" + "5": DV in
When you use a Sony VCR, the
above commands are preset. For
other brands, it is possible to
"teach" the above sequential
button operations using the
Learning function (page 15).