Sony RM-VL900T Operating Instructions Manual page 20

Using Unpreset Remote Control
Operations
— Learning Function (continued)
To clear all function signals
"learned" for a specific
component
Example: To erase all functions
"learned" by VCR button.
1
Press and hold S (set) for
over 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
GB
20
2
While holding x pressed,
press the desired
Component Select button.
The S (set) indicator turns off,
and the selected Component
button lights up.
Note
Through this operation, you can
only erase the "learned" functions
of all buttons for a specific
component. The "learned"
functions for the Component Select
buttons cannot be changed here.
You must be sure beforehand of
which "learned" function you want
to erase.
3
Press S (set) to finish
setting.