Recording Scenes; Operation Guide - Elation DMX-SOLO 256 User Manual

2. Operation Guide

2.1 Recording Scenes

2.1.1 Recording scenes into a Bank
K
SCENE
SCENE RECORD
SCENE 1-40
RECORD
7
1. Apply power on, the Segment Display reads "bk01",
tap Scene button causing its LED to light or flash.
2. Select the Bank using UP/DOWN button, there are
total 24 banks, each bank can hold up to 40 scenes.
3. Press and hold down Record button for 3 seconds,
both Scene and Record LED's will flash indicating
recording is active, and the recorded scenes will be
indicated by the lit LED's.
4. Before you can record scenes, be sure DMX LED on
this unit is flashing. Select or create a scene on your
DMX controller in connection with this unit.
5. Keep pressing Record button, tap any of 1-40 buttons
to record the scene into this button, all LED's will flash
3 times briefly indicating this operation.
6. Continue steps 3-4 until you've recorded up to 40
scenes into a bank. Tap Blackout button to go back.