Recording Chases - Elation DMX-SOLO 256 User Manual

2. Operation Guide

2.3 Recording Chases

2.3.1 Record Scenes into a Chase
S t 0 0
CHASE
C H A S
RECORD
S t 0 0
CHASE
K
SCENE
1. Apply power on, tap Chase button causing its LED to
light or flash, the Segment Display shows "ST00".
2. Press and hold down Record button for 3 seconds,
the Record LED will flash indicating recording is
active, the Segment Display reads "CHAS", and the
recorded chases will be indicated by the lit LED's near
1-40 buttons.
3. Tap one of 1-40 buttons to select a chase, its LED l
flashes, the Segment Display shows "ST00" or " ST01".
"ST00" refers to the chase is empty, and "ST01" refer
to the chase contains scenes and the current scene
(the first step) is playing.
4. Tap Scene button, these three LED's of Scene, Chase
and Record will flash in unison, the Segment Display
shows "bk01" and the scenes recorded in the bank is
indicated by the lit LED's.
10