Digital Optical Connections; D-Bus Connection; Remote Control Cable Connections - Marantz DR6000 User Manual

INSTALLATION
For recording and playing, connect the CD-Recorder to a digital
amplifier or other equipments based on the diagram below. Be-
fore connection the cables, remove the dust caps from the dig-
ital optical connections. We recommend that you save the
caps.
POWER ON/OFF
5
1 For external recording, connect a fiber-optic cable
tween the DIGITAL OPTICAL INPUT of the CD-Recorder
and the DIGITAL OPTICAL OUTPUT of an external ampli-
fier or CD player.
2 For playback, connect cable between the OPTICAL OUT-
PUT-socket on the CD-Recorder and the DIGITAL OPTI-
CAL INPUT-socket of an amplifier e.g. DAT or DCC.
Note:
For playback, the digital coaxial outputs or analog outputs of
the CD Player and CD-Recorder should be connected to an
amplifier

Remote control cable connections

Downloaded From Disc-Player.com Marantz Manuals
CD RECORDER DR6000
REC TYPE REW FF STOP PLAY/PAUSE
OPEN/CLOSE
Recordable
ReWritable
EASY JOG
LEVEL PHONES
DISPLAY SCROLLPE REC
SOURCE ERASE STORE CANCEL FINALIZE
MENU DELETE
- +
PUSH ENTER
OPTICAL
INPUT OUTPUT
6
OUTPUT INPUT
Amplifier

D-BUS CONNECTION

By connecting DR6000 to the Marantz amplifier using a D-BUS
remote control cable , you can operate the operations of
DR6000 from the remote control of the amplifier. Set the re-
mote control selector to 'EXTERNAL'.
POWER ON/OFF
Note:
When you don't use the D-BUS connection, ALWAYS set
the remote control selector to 'INTERNAL'.
be-
6
CD RECORDER DR6000
REC TYPE REW FF STOP PLAY/PAUSE
OPEN/CLOSE
Recordable
ReWritable
EASY JOG
LEVEL PHONES
DISPLAY SCROLLPE REC
SOURCE ERASE STORE CANCEL FINALIZE
MENU DELETE
- +
PUSH ENTER
IN
OUT
EXTERNAL INTERNAL
REMOTE
CONTROL
7
REMOTE
CONTROL
OUT
IN
Marantz Amplifier