Connecting The Digital Output - Pioneer DV-686A-s Operating Instructions Manual

02 Connecting up

Connecting the digital output

This player has both optical and coaxial-type
digital audio outputs for connection to an AV
receiver. Connect whichever is convenient.
Depending on the capabilities of your AV
receiver, you might have to set up this player to
output only digital audio in a compatible
format. See Digital Audio Out settings on
page 34 and refer to the operating instructions
that came with your AV receiver.
Note that SACD audio is not output through
these jacks, so this connection should be in
addition to, rather than instead of, a 5.1
channel analog connection.
• Connect one of the DIGITAL AUDIO OUT
jacks on this player to a digital input on
your AV receiver.
For an optical connection, use an optical cable
(not supplied) to connect the OPTICAL
DIGITAL AUDIO OUT jack to an optical input
on your AV receiver.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the COAXIAL DIGITAL AUDIO OUT jack to a
coaxial input on your AV receiver.
Downloaded From Disc-Player.com Pioneer Manuals
14
En
DIGITAL IN
(OPTICAL)
AV receiver DIGITAL IN
(COAXIAL)
OPTICAL COAXIAL
DIGITAL AUDIO OUT
AC IN