5
Copying
Making a copy
Changing copy options
Changing copy
document options
You can copy documents and pictures with your all-in-one printer. The printer
produces high–quality color or black-and-white copies on a variety of paper types
(see
Paper types, page
To copy a document or a picture using the default settings:
1. Lift the scanner lid, and place the document or picture face down on the glass.
2. Close the lid.
NOTE: Single-button document copy is a feature that lets you put paper on the
scanner and immediately press Start , without following the remaining steps
below. You can use this feature when the printer has been idle or when it is
turned on; the printer automatically goes to Copy Document mode.
3. Press Home .
4. If needed, press
5. Press Start to begin copying.
You can change the copy options for an individual copy, or you can change the
settings for copying documents or copying photos, and save them as the defaults.
To change the copy document options:
1. Press Home .
2. If necessary, press
3. Press OK .
www.kodak.com/go/aiosupport
12).
to select Copy Document or Copy Photo .
or
to select Copy Document .
22
Need help?
Do you have a question about the ESP 5200 Series and is the answer not in the manual?
Questions and answers