Configuring Your Printer
Setting up an IP
address
Verifying the
network
configuration
9
You should only need to set up an IP address for your printer if you are
IMPORTANT:
having a problem with connecting. Typically, it is not necessary to set up an
IP address. This procedure is for advanced users who know how to obtain
the IP address for the printer.
All IP address entries have the following format: 000.000.000.000. Within each
three-digit grouping, the number must be right-justified. If an address or subnet
mask has only one or two characters between the periods, include one or two
leading zeros in front of that number. For example:
The address as it may appear
in your documentation
149.89.138.149
149.2.40.149
For information about obtaining the printer IP address, go to
www.kodak.com/go/inkjetnetworking.
To set up your IP address on the printer:
1. Press Home .
2. Press
to select Network Settings , then press OK .
3. Press
to select Advanced IP Address Setup , then press OK .
4. Press OK again to continue.
5. Select one of the following, then press OK :
• Dynamic (DHCP)
• Automatic (Private)
• Manual (Static)
6. If you selected Manual (Static) , you are prompted to enter an IP address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after
each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your network administrator or Internet service provider for more
information.
To verify that you are connected to your wireless network:
1. Press Home .
2. Press
to select Network Settings , then press OK .
to select View Network Configuration , then press OK .
3. Press
The wireless network settings appear on the LCD.
If the printer is connected to your network, you will see the network name and
the word CONNECTED.
4. To scroll through the information, press
5. When you are done, press OK .
www.kodak.com/go/aiosupport
How to enter the address
in the printer menu
149.089.138.149
149.002.040.149
.
Need help?
Do you have a question about the ESP 5200 Series and is the answer not in the manual?
Questions and answers