Scanning To Network Folder - Kodak 5.1 Extended User Manual

Scanning to network folder

You can scan your original and immediately send the scanned file to a network folder
directly from the printer.
NOTE: You must first use the Online Printer Management Tool to set up scanning to
network folder options (see
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Press to select Scan, then press OK .
3. Press to select Scan to Network Folder, then press OK.
4. Select Sharing folder, then press OK.
5. If necessary, enter the 4-digit PIN number (see
press OK .
6. Press Start.
www.kodak.com/go/aiosupport
KODAK HERO 5.1 All-in-One Printer
Setting up Scan To Network Folder, page
page 27), select Done , then
25).
79