Table of Contents
Advertisement
Viewing the network configuration
To set up your IP Address on the printer:
1. Press Home.
2. Press
to select Network Settings, then press OK.
3. Press
to select Advanced IP Address Setup, then press OK.
4. Press OK again to continue.
5. Select one of the following, then press OK:
• Dynamic (DHCP)
• Manual (Static)
6. If you selected Manual (Static), you are prompted to enter an IP Address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after
each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet Service Provider or network administrator for more
information.
To view the network configuration and verify that you are connected to your wireless
network:
1. Press Home.
2. Press
to select Network Settings, then press OK.
3. Press
to select View Network Configuration, then press OK.
The wireless or Ethernet network settings appear on the LCD, including:
• Printer Hostname
• Connection
• Speed
• IP Address
• IP Address Type
• Network Subnet
• Connected Network SSID
• Security
• Authentication
• Channel
• Region
• Radio (on/off)
• MAC Address
If the printer is connected to your network, you will see the network name and
the word CONNECTED.
4. To scroll through the information, press
5. When you are done, press OK.
www.kodak.com/go/aiosupport
KODAK HERO 5.1 All-in-One Printer
.
11
Advertisement
Table of Contents
