Table of Contents
Advertisement
Printing
Using default settings to print a picture
46
1. Load photo paper with the logo side facing up (see
page
38), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot, or connect the digital camera
or portable drive to the front USB port, then press
press OK .
Use only one slot or port at a time.
IMPORTANT:
left paper-edge guide
3. Press
or
to select the picture you want to print.
4. Press Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
To prevent loss of data from your memory card, do not remove it from the
IMPORTANT:
printer while printing.
www.kodak.com/go/aiosupport
Loading photo paper,
to select View Photos , then
Advertisement
Table of Contents
