Table of Contents
Advertisement
Installation
^ Tighten all screws again.
^ Fit the top cover o, and click it into
place.
^ Fit the side covers p, making sure
they click into place.
94
To make sure the appliance is
correctly installed:
– The doors must close properly.
– The doors must not touch the
housing unit.
– The seals at the top edge of the
handle side must fit properly.
^ To double check, place a torch in the
appliance and close the doors.
Switch the lights off in the room. If
you can see any light shining out
from the sides, double check the
installation.
Advertisement
Table of Contents
