Table of Contents
Advertisement
Installation
Carry out the following steps on both
doors.
^ The distance between the appliance
door and the fixing bracket is set to 8
mm at the factory. Check this
distance and adjust if necessary.
^ Push the fitting aids b up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see -
in diagram).
90
Tip: Push up the fitting aids b with the
furniture front until they are the same
height as the doors of adjacent kitchen
units.
^ Undo the nuts c and take the fixing
bracket d off together with the fitting
aids b.
Advertisement
Table of Contents
