Door Seals; Ventilation Gaps - Miele KFNS 37682 iD Operating And Installation Instructions

Miele kfns 37682 id fridge-freezer combination
Table of Contents

Advertisement

The following parts cannot be cleaned
in a dishwasher:
– Stainless steel fascias on the door
shelf / bottle shelf
– Stainless steel strips with LED
lighting / stainless steel strips and
protective strips on the adjustable
shelves
– Bottle rack
– PerfectFresh Pro zone drawers with
lids
– Freezer drawers
^ Clean these parts by hand.
^ Clean the condensate channel and
drain hole frequently so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
To do this, remove the PerfectFresh
Pro zone drawers.
^ The PerfectFresh Pro zone drawers
sit upon telescopic runners. Clean
these telescopic runners with a damp
cloth.
Be careful not to wash out the
special lubricant in the telescopic
runners during cleaning.
^ Remove any soiling on stainless steel
strips and fascias with the Miele care
product for stainless steel.
^ Always apply this care product after
cleaning to protect stainless steel
surfaces and prevent resoiling.
Cleaning and care
^ Leave the doors open to air the
appliance for a short while.

Door seals

Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
^ The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.

Ventilation gaps

^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx3587

Table of Contents