Table of Contents
Advertisement
^ Whilst counterholding the adjusting
bolts h with a screwdriver, tighten
the nuts c on the appliance doors
with the ring spanner j.
^ The cover strip k must be
completely hidden in the niche, and
must not protrude.
^ Drill fixing holes l in the furniture
doors and screw in the screws m.
Make sure the two metal edges are
aligned (Symbol II).
^ Close both doors.
Adjusting the position of the door
– Adjusting the depth (Z)
^ Loosen the screws i at the top of
the appliance door and the screw n
on the lower fixing bracket. Move the
furniture door to create a gap of
2 mm between the furniture door and
the housing unit.
Installation
93
Advertisement
Table of Contents
