Sharp NoteVision PG-MB60X Operation Manual page 21

4.
Adjust the angle
Adjust the projector angle
• • • • • Adjust the projector angle using the HEIGHT
ADJUST button.
HEIGHT ADJUST button
5.
Adjust the focus and the zoom
1 1 1 1 1 Bring the projected image into focus
• • • • • Bring the projected image into focus by
adjusting the focus.
On the projector
1 Press
2 Adjust by pressing \ or |.
On the remote control
Adjust by pressing the
FOCUS buttons.
6.
Select the INPUT mode
Select the "INPUT 1" using the INPUT buttons on the projector or the INPUT1 button on the remote control.
On the
projector
7.
Turn the Power off
Press the STANDBY button, then press that button again while the confirmation message is displayed, to put
the projector into standby mode.
On the projector
• • • • • Unplug the power cord from the AC outlet after the cooling fan stops.
Downloaded From projector-manual.com Sharp Manuals
.
" " On-screen Display (RGB) " "
"
On the remote
control
• • • • • When pressing ' ' ' /" ' ' " " on the projector, input mode switches in order of : " "
INPUT 1 INPUT 2 INPUT 3
• • • • • When using the remote control, press
On the remote control
• • • • • This projector is equipped with an "Auto Keystone
Correction" function that automatically corrects
any trapezoidal distortion within the projected
image. The correction is made automatically
provided the vertical incline or decline is within 12
degrees.
2 2 2 2 2 Adjust the projected image size
• • • • • Adjust the projected image size by adjusting
zoom.
On the projector
1 Press
2 Adjust by pressing ' or ".
On the remote control
Adjust by pressing the
ZOOM buttons.
INPUT 4
/ /
" " " " " On-screen Display
Page 30
.
Page 32
/ to switch the INPUT mode.
Page 33
Page 29
-17