Lid Switch & Out Of Balance Switch Test; Drain Pump Test; Water Valve Test - EcoSmart GWL10US Service Supplement Manual

The following tests can be carried out in the diagnostic mode.
3.2 LID SWITCH & OUT OF BALANCE SWITCH TEST
Press the SPIN SPEED UP button until the MEDIUM SPIN LED is on, (binary count 4).
When the Lid is open the 12-minute wash LED will be on.
Activating the Out of Balance lever under the top deck will cause the 6-minute LED to turn on.
Moving the inner basket towards the right hand corner of the cabinet can activate the Out of
Balance lever. It will take up to 1 second for the LED to respond after the Out of Balance has
been activated.
Also when in this mode with the MEDIUM SPIN SPEED LED on, the SPIN LED will display
the SIZE SETTING.

3.3 DRAIN PUMP TEST

The REGULAR CYCLE button turns the drain pump on or off. The REGULAR LED will turn
on when the pump is on. This feature can be used to drain the tub.

3.4 WATER VALVE TEST

Press the WASH TEMPERATURE DOWN button to turn the Cold Water Valve on. The Cold
Water LED will also turn on.
Press the WASH TEMPERATURE UP button to turn the Hot Valve on. The Hot Water LED
will also turn on.
NOTE:
The drain pump test, water valve test, restart and recycle features can be used on any level in the
diagnostic mode.