Diagnostic Mode - EcoSmart GWL10US Service Supplement Manual

3.0 DIAGNOSTIC MODE

The DIAGNOSTIC MODE for mode GWL10 now incorporates both the switch test mode and
the data display mode. You no longer have to use the advance button to toggle between them.
To enter the DIAGNOSTIC MODE:
1. Turn the power on at the power point and off at the console.
2. Press and hold the WASH TEMPERATURE DOWN then press the POWER button. The
machine will give 2 short beep
3. Using the SPIN SPEED UP or the SPIN SPEED DOWN buttons can now extract the
different levels of information.