Ford Crown Victoria 2004 Owner's Manual page 47

Lights
Replacing high-mount brakelamp bulbs
1. Make sure headlamp switch is in
OFF position, then remove two
screws from the lamp assembly.
2. Carefully lift the lamp assembly
up for access to the bulbs.
3. Carefully pull the bulb socket out
of the lamp assembly.
4. Pull the bulb straight out of the
socket and push in the new bulb.
To install, reverse the removal
procedure.
47
2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English (fus)