Ford Crown Victoria 2004 Owner's Manual page 231

Item Ford part
name
Rear Axle Motorcraft SAE
2
Lubricant 80W-90
Premium Rear
Axle Lubricant
Windshield Motorcraft
washer fluid Premuim
Windshield
Washer
Concentrate
1
Use only brake fluids certified to meet Ford specifications. DOT 3 fluid
is recommended. However, if DOT 3 is not available, DOT 4 fluid can be
used.
2
Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of
Traction-Lok rear axles.
3
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your scheduled maintenance
guide to determine the correct service interval.
ENGINE DATA
Engine
Cubic inches
Required fuel
Firing order
Spark plug gap
Ignition system
Compression ratio
2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
Ford part
number
XY-80W90-QL
ZC-32-A
4.6L V8 engine
281
87 octane
1-3-7-2-6-5-4-8
1.3-1.4 mm (0.052-0.056 inch)
Coil on plug
9.4:1
Ford
specification
WSP-M2C197-A
WSB-M8B16–A2
231