Installing and Configuring PuTTY—Intel IoT Gateway Development Kit DK200 Series
Loading Saved Session
This section guides you through loading the Intel IoT Gateway session.
1. Click Intel IoT Gateway under Saved Sessions. See number 1 in the following
figure.
2. Click Load to display the Intel IoT Gateway settings. See number 2 in the figure.
3. Change the Serial line to /dev/ttyUSB0 and then click Save. See numbers 3
and 4 in the figure.
4. Click Open to open a PuTTY Virtual Terminal session. See number 5 in the figure.
Figure 60.
Update Session with Correct tty Port
A PuTTY Virtual Terminal session displays as a black screen with a cursor in the
upper left corner.
April 2015
Order No.: 330295-004
®
Intel
IoT Gateway Development Kit DK200 Series
Getting Started Guide
81