Appendix I Installing And Configuring Putty; Putty Configuration Screen - Intel IoT Gateway Development KitDK200 Series Getting Started Manual

Appendix I Installing and Configuring PuTTY

This section guides you through installing and configuring a Secured Shell (SSH) /
Telnet network protocol utility, named PuTTY. PuTTY is an open source virtual terminal
that is available in the Ubuntu 14.04 release.
1. From your Host System
install PuTTY.
Note: PuTTY is also available from
sudo apt-get install putty
2. Type your password at the prompt:
3. Type
Starting and Configuring PuTTY
1. From your Host System
putty
The PuTTY Configuration screen is displayed, as shown below:
Figure 55.

PuTTY Configuration Screen

®
Intel IoT Gateway Development Kit DK200 Series
Getting Started Guide
76
Intel IoT Gateway Development Kit DK200 Series —Installing and Configuring PuTTY
$HOME
at the prompt:
y Do you want to continue [Y/n]?
$HOME
command prompt type the following command to
http://ubuntu.com
[sudo] password for [username]
command prompt, start PuTTY:
April 2015
Order No.: 330295-004