Canon imageRUNNER 1750 Remote Manual page 97

Server Name:
Server Address:
Location to Start
Search:
Port Number:
Attribute of User
Name:
Attribute of E-mail
Address:
4
Login Information:
Domain Name:
Use System
Manager ID:
User Name:
Password:
Use SSL:
4-20
Specifying the Authorized Send Settings
Enter the name of the authentication server.
Specify the IP address or DNS name of the authentication server.
If log in to an authentication server uses the Kerberos
authentication method, the DNS name needs to be in a Fully
Qualified Domain Name (FQDN) format.
Specify the location of the directory tree to start searching for
user entries.
Specify the port number for accessing the authentication server.
The default port number is '389' (non-SSL) or '636' (SSL).
Specify the user attribute name such as 'sAMAccountName' and
'uid'. The specified attribute is used to validate the user name
entered when the user logs in to Authorized Send.
Specify the mail attribute name such as 'mail'. The specified
attribute is used to obtain the currently logged on user's e-mail
address from the authentication server. The obtained address is
specified as destination when the user presses [Send Mail To
Self]. (See Chapter 2, "Sending Documents," in the Sending and
Facsimile Guide.)
Specify the authentication method used when the machine
communicates with the authentication server. Select [Use] to use
the Simple authentication method, or [Use (Security
Authentication)] to use the Kerberos authentication method. The
Kerberos authentication method is available for Active Directory.
If you select [Use (Security Authentication)] for <Login
Information>, enter the directory tree name of the Active
Directory, such as <team1.salesdept.canon.co.jp>.
This setting is available only when [Use] is selected from [Login
Information] as the authentication method. Select this check box
to use the administrator's ID and password for the authentication
server when performing the first bind of the simple binding
process. If you use anonymous binding, deselect this check box.
This text box is available only when [Use System Manager ID] is
selected. Enter the administrator's user name.
This text box is available only when [Use System Manager ID] is
selected. Enter the administrator's login password.
This setting is available only when [Use] is selected from [Login
Information] as the authentication method. Select this check box
to use the Secure Sockets Layer (SSL) protocol when the
machine communicates with the authentication server. If you
select this check box, the value for <Port Number> automatically
changes to '636'.