● When User Management is enabled:
❑
Enter the User ID and password.
You can log in as the System Manager by entering the User ID registered as the
System Manager in the [User ID] text box and its password in the [Password] text
box.
● When both Department ID Management and User Management are
enabled:
NOTE
The same Remote UI top page as shown in "When User Management is
enabled:," on p. 1-13 appears.
❑
Enter the User ID and password.
You can log in as the System Manager by entering the User ID registered as the
System Manager in the [User ID] text box and its password in the [Password] text
box.
4
Click [OK].
The Device Status page appears. (See "Viewing the Machine Status and Information," on
p. 1-14.)
Starting the Remote UI
1
1-13