Canon imageRUNNER 1750 Remote Manual page 110

❑
Click [Register].
The Register User page is displayed.
❑
Specify the necessary information ➞ click [OK].
User Name:
MIB Access Permission:
Security Settings:
Authent. Algorithm:
Authentication Password:
Confirm:
Enter the user name (32 alphanumeric characters
maximum).
Select this check box to give read/write permission to the
user.
Select the security setting ([Auth. Yes/Encry. Yes], [Auth.
Yes/Encry. No], or [Auth. No/Encrypt. No]).
If you select [Auth. Yes/Encry. Yes], for example, both
authentication and encryption are enabled.
Select the algorithm to be used for authentication ([MD5]
or [SHA1]).
Enter the password for authentication (6 to 16
alphanumeric characters).
Enter the password again to confirm it.
Specifying the SNMPv3 Settings
4
4-33