Selecting The Aspect Ratio Of Your Recordings (16:9 Widescreen Or 4:3) - Canon DC100 Instruction Manual

power switch towards MODE and release it, or move the power switch to
and back to ON.
About the LCD and viewfinder screen: The screens are produced using
extremely high-precision manufacturing techniques, with more than 99.99% of
the pixels operating to specification. Less than 0.01% of the pixels may
occasionally misfire or appear as black, red, blue or green dots. This has no
effect on the recorded image and does not constitute a malfunction.
When using a tripod: Do not leave the viewfinder
exposed to direct sunlight as it may melt (due to
concentration of the light by the lens). Do not use tripods
with fastening screws longer than 5.5 mm. Doing so may
damage the camcorder.
Reviewing the Last Scene Recorded
Press and release
• The camcorder plays back the last scene and returns to record
pause mode.
• While reviewing the scene, select (
recording mode.
• While reviewing a scene immediately after recording it, you can also delete the scene
by selecting (
Selecting the Aspect Ratio of your Recordings
(16:9 Widescreen or 4:3)
You can select the aspect ratio of your recording to match your TV.
To change the operating mode, refer to About the Operating Modes (
Widescreen is not available when the recording mode is set to [LP] on a disc initialized in
VIDEO mode.
WIDE SCR
Press
Repeatedly pressing
(16:9) and normal (4:3) aspect ratios.
When recording in Widescreen mode, with [IMG STAB] set to [OFF] (
you can have a wider view angle.
Playing back a Widescreen recording: TV sets compatible with the Video
ID-1 system will automatically switch to wide (16:9) mode. Otherwise, change
the aspect ratio of the TV manually. To play back on a TV with normal aspect
ratio (4:3) change the [TV TYPE] setting accordingly.
Downloaded From VideoCamera-Manual.com Manuals
(record review).
) the icon ( 53).
.
WIDE SCR
toggles between the Widescreen
) the icon and press ( ) to return to the
9).
31),
23
E