Canon DC100 Instruction Manual page 21

A confirmation message will appear on the screen. Select (
( ) to start the disc initialization.
• The disc initialization will take approximately one minute. Avoid moving the
camcorder while the operation is in progress.
• You can start recording movies once the record pause
The disc initialization screen may not appear automatically if you operated the
camcorder's buttons while the disc recognition was in progress. In that case,
initialize the disc using the menu option (
The process of recognizing a disc may take a moment. The
move while the disc is being read. Wait until the camcorder finishes recognizing
the disc before you start recording.
Removing the Disc
OPEN
1. Slide
cover completely until it stops.
• Do not subject the camcorder to strong impacts while the DISC access indicator is
on or flashing.
• Retract the grip belt under the camcorder so it will not get in the way of the disc
cover.
• It may take a moment after pressing
2. Grab the edges of the disc and gently pull it out.
Be careful not to touch the recording surface of the disc or the pick up lens.
3. Close the disc cover.
When you slide
recorded on the disc before the disc cover opens. While the DISC access indicator
is on or flashing do not subject the camcorder to shocks such as forcefully laying it
on a table.
Downloaded From VideoCamera-Manual.com Manuals
fully in the direction of the arrow and gently open the disc
OPEN
after making a recording, additional important data is
55).
OPEN
for the disc cover to open.
) [YES] and press
indication appears.
display will
E
21