Playback; Playing Back Movies - Canon DC100 Instruction Manual

Playback

Playing Back Movies

To change the operating mode, refer to About the Operating Modes (
The scene index screen appears with the selection frame on the first scene.
1. Move (
frame to the scene you want to
play back.
+
Press
previous index page.
2. Press
• Playback of the scenes recorded on the
disc will start from the scene selected.
• When the end of the last movie recorded
is reached, playback will stop and the
camcorder will return to the scene index
screen.
During Playback:
3. Press
4. Press
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the recording's time code will be
displayed at the upper right corner of the screen in hours : minutes : seconds.
You can also choose to display instead the date and time when the scene was
recorded and additional recording data (
As long as you don't turn off the camcorder you can resume playback from the
point you stopped last.
Special Playback Modes
Fast Forward Playback /
Fast Reverse Playback
During normal playback, press
Repeatedly press the button to increase the
playback speed.
Fast forward: 1.5x → 5x → 15x → 25x the
Fast reverse: 2.5x → 5x → 15x → 25x the
Playback Pause
During normal playback, press
Downloaded From VideoCamera-Manual.com Manuals
26
, ) the selection
–
or to move to the next or
/ to begin the playback.
again to pause the playback.
/
to stop the playback and return to the scene index screen.
normal speed.
normal speed.
or .
.
/
9).
30).