HP UPS Network Module User Manual page 44

Select Disabled from the Recipient pull-down menu.
2.
Click Save.
3.
To configure the format of email notifications:
Click Email Message Settings.
1.
Configure the email format for all recipients on the Email Message Settings screen (on page 44).
2.
To configure the SMTP server:
Click Network Settings.
1.
Configure the SMTP server settings on the Network Settings screen (on page 32).
2.
Click Help to view online help.
Email Message Settings screen
Click Email Message Settings on the Email Notification screen to display the Email Message Settings screen.
This screen allows an administrator to customize the format of email messages initiated by the UPS Network
Module. The email message format applies to all recipients.
To customize email messages:
Enter the address for the source of email messages in the Sender field. The sender address can contain
1.
up to 59 characters. The default value is ups@domain.com. Depending on your SMTP server
configuration, an existing domain might be required, with the user belonging to that domain.
Enter text you want to include in the email message subject lines in the Subject field. Select from the
2.
optional checkboxes to build the message subject:
UPS name—Includes the name of the UPS in the email subject when selected
o
UPS location—Includes the geographic location of the UPS in the email subject when selected
o
Event message—Identifies the event generating the message in the email subject when selected
o
HP UPS Network Module web interface 44