Logs; Ups Data Log Screen - HP UPS Network Module User Manual

Up to seven shutdown and restart sequences can be scheduled in one week. The minimum time allowed
between a shutdown and restart is 30 minutes. The maximum time allowed between a shutdown and restart
is 1 week. For a valid schedule, be sure the time is set correctly on the Time Settings screen (on page 34).
To schedule shutdowns and restarts:
Select the time of the shutdown in the pull-down menu for the appropriate day.
1.
Select the time of the restart in the pull-down menu of the appropriate day.
2.
Click Save.
3.
Click Help to view online help.

Logs

Menu options listed under Logs include:
•
UPS Data Log
•
Event Log
•
System Log

UPS Data Log screen

Click UPS Data Log in the menu tree to display the UPS Data Log screen. This screen displays a log of UPS
data collected by the UPS Network Module. The frequency at which data is collected can be modified on the
System Settings screen (on page 30). By default, data is collected every 60 seconds.
NOTE:
local time zone.
The following information is displayed for a single phase UPS:
•
AC Input Voltage—The utility voltage supplying the UPS
("UPS Data Log screen" on page 27)
("Event Log screen" on page 28)
("System Log screen" on page 29)
In the UPS Data Log and the Event Log, the date and time stamps are converted to the
HP UPS Network Module web interface 27