Network Settings Screen - HP UPS Network Module User Manual

Enter a new password in the New Password field. This text field is limited to 10 characters. The default
2.
password is admin.
Re-enter the new password in the Confirm New Password field.
3.
Select the authentication method in the Security mode field.
4.
Authentication for configuration—Configuration screens are protected by a user name and
o
password.
Full authentication—All pages are protected by a user name and password.
o
SSL and full authentication—All pages are protected by a user name and password, and are only
o
accessible in SSL. Access to the web interface occurs through HTTPS. The connections to the UPS
Network Module remain in standard mode (secure TCP).
Click Save.
5.
Click Help to view online help.

Network Settings screen

Click Network in the menu tree to display the Network Settings screen. This screen allows an administrator
to configure network settings and authorize remote firmware upgrades for the UPS Network Module.
To configure the network settings:
Select Enabled from the BootP/DHCP pull-down menu to allow configuration of network parameters by
1.
a BootP or DHCP server. After each restart, the UPS Network Module makes five attempts to recover the
HP UPS Network Module web interface 32