Table of Contents
Advertisement
3. Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP
address and network settings of the devices. It even provides a convenient way to set the
network settings for multiple devices simultaneously using the batch setting function.
NOTE: Default mode is DHCP.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server
in order to avoid using a previously assigned IP address.
2.
Ensure the device is powered on and correctly connected to the network.
3.
MAC Address: Each device has a unique Ethernet address (MAC address) shown on the
label of the device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000
B1
4.
Although the IP Installer is able to find and configure any Pixord devices on the LAN
except those that are behind a router, it is a good idea to set the host PC to the same
subnet. In order to connect to the Web-based user interface of the camera, the host PC
must be in the same subnet. For more information about subnets, please consult your
network administrator.
Using IP Installer to Assign an IP Address to ND614
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer
icon on the desktop,
2.
Click the [Device Search] to search the device in the LAN.
7
Advertisement
Table of Contents
