Table of Contents
Advertisement
3. Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP address
and network settings of the devices. It even provides a convenient way to set the network
settings for multiple devices simultaneously using the batch setting function. Moreover, IP
Installer can save the network settings for all devices as a backup and restore them when
necessary.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in
order to avoid using a previously assigned IP address.
2.
Ensure the camera is powered on and correctly connected to the network.
3.
MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label
of the device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000
B1
4.
Although the IP Installer is able to find and configure any device on the LAN except those that
are behind a router, it is a good idea to set the host PC to the same subnet. In order to connect
to the Web-based user interface of the camera, the host PC must be in the same subnet. For
more information about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to NB670
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer icon
on the desktop,
2.
Click the [Device Search] to search the device in the LAN.
7
Advertisement
Table of Contents
