Table of Contents
Advertisement
FAQ
1.Restore Factory Default Settings
In some cases, system does not respond to any operation, this process gets the unit back to
initial status, so that it can be reconfigurable for up and running again.
To restore factory default, follow the steps below:
1.
Unplug the power jack to turn off the camera
2.
Press the button (circle in red) and keep it pressed until instructed to release.
3.
Plug in the power jack to turn on the camera. The LED will start flashing in a short
while.
4.
Release the button when the LED starts quick flashing. The device should be set
back to factory default.
43
SD _ Slot
Advertisement
Table of Contents
