Table of Contents
Advertisement
3. Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network
settings of the devices. It even provides a convenient way to set the network settings for multiple devices
simultaneously using the batch setting function. Moreover, IP Installer can save the network settings for all
devices as a backup and restore them when necessary. NOTE: Default mode for N600 is DHCP.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in order to avoid
using a previously assigned IP address.
2.
Ensure the N600 is powered on and correctly connected to the network.
3.
MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the device
as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000
B1
4.
Although the IP Installer is able to find and configure any N600 on the LAN except those that are behind a
router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-based user
interface of the camera, the host PC must be in the same subnet. For more information about subnets, please
consult your network administrator.
Using IP Installer to Assign an IP Address to N600
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the desktop
2.
Click the [Device Search] to search the device in the LAN.
6
Advertisement
Table of Contents
