Contents Notices ..............................2 Introduction ............................3 Installation ............................4 Using the Web UI ..........................12 1. Live View ..........................13 2. Video ............................16 General ..........................16 Advanced ........................... 17 3.Camera ............................ 19 General ..........................19 Advanced ........................... 21 4.
Notices This user manual is intended for administrators and users of the H.264 Network Camera, including instructions for using and managing the camera on your network. The use of surveillance devices may be prohibited by law in your country. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use.
Introduction The NL621 Network Camera delivers superior H.264-AVC performance, state of the art design and function. NL621 is specifically adapted for maximum performance indoor applications, such as commercial, banking, government buildings, schools, universities and airports. H.264-AVC video compression can lower bandwidth and storage requirements without compromising image quality;...
Installation 1. Hardware Connection 1. Prepare a PC with Ethernet link to the network 2. Connect LAN port (RJ45) of the camera to a network switch/hub 3. Connect power jack 4. Ensure the power adaptor specification matches the power system (110V or 220V) and connect the adaptor to the outlet 5.
2. Software Installation The following software is necessary for the proper display and use of the NL621 from the Web site. The software will be taken from the Software Package CD. IP Installer The IP Installer is used to locate and configure network cameras and video servers on the LAN. This utility is useful for conveniently configuring the network settings of the device, or for finding a device once the network settings have been modified.
3. Network Configuration IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network settings of the devices. It even provides a convenient way to set the network settings for multiple devices simultaneously using the batch setting function. Preparation before IP Assignment Always consult your network administrator before assigning an IP address to your server in order to avoid using a previously assigned IP address.
Page 8
From the list, select the device with the MAC Address that corresponds to the NL621 that is to be configured. The MAC Address is identical to the unit’s S/N (Serial Number). Double click the select item to open the Property Page or right click the item to select the [Single Device Setting] Modify the network settings of the camera...
Page 9
After filling in the properties, click [Set] button to complete the configuration settings. Click the [Batch Device Setting] to set several devices.
Page 10
Language support for Chinese, English and Spanish.
Page 11
Open the Web-based UI of the selected camera To access the Web-based UI of the selected unit, run the View > Open Web on the menu bar. For first time user, there will be a prompt to install the ActiveX control. Confirm the installation as it is required to view the video stream and some operations.
Page 12
If the device has been configured correctly, the default Web browser will open to the home page of the selected device. Verify and Complete the Installation from Your Browser When browsing the Home Page at the first time with the Microsoft Internet Explorer , you must temporarily lower your security settings to perform a one-time-only installation of the ActiveX component onto your workstation, as described below:...
Using the Web UI Start your Web browser and enter the URL or IP address in the Address field. The Home page of the camera is now displayed. Launch a web browser, Enter the IP address of the camera in the address field of the browser, The login process will require username and password for a new session connection.
1. Live View Video format Resolution Frame Rate Bit rate IP address of the camera Button Description Click for more general/advanced camera settings Select languages among English, traditional Chinese and simplify Chinese Check actual size to view the actual size (resolution) of the image Click to trigger the alarm manually Choose among the 3 streams for viewing,Digital PTZ is only available with stream 2...
Page 15
Button Description Full screen Listen the audio input from local end Talking function Record instant live video Snapshot the image...
Page 16
Configuration Pages List Video General Advanced Camera: General Advanced Event Event Server Motion Detection I/O Ports Event Configuration Network General Advanced SMTP (E-mail) DDNS System Information User ...
2. Video This section describes how to configure the video streaming from the device, and the related camera image configurations. Users with Administrator or Operator authority are intended for these configurations. Click on SETUP button to enter in the configuration pages. General Video General Setting: Check each box to enable streams (max 3) for live viewing Note: Digital PTZ is only available with stream 2...
Zoom: Digital zooms in/out. Pan Arrow: Click to control Pan function. Step: Setting the speed of Pan function. (1、5、10) Advanced The Video Advanced setting page provides more detail stream configurations. These settings can affect video size, quality. The expected transferring performance must be under the condition of full network bandwidth...
Page 19
Stream Setting: 1: Configuration of stream 2 is the same as stream 1, but Stream 2 can only be set to 320x240 or 640x480, 2: Stream3 only RTSP path、image format and frame rate can be adjusted, the rest of the settings are fixed. RTSP Path - The RTSP Path is the stream ID used for RTSP client streaming connection, such as VLC player.
3. Camera This page provides the basic image color appearance and further image settings. General Camera General Setting: Brightness: the luminance of image view Hue: refer to pure a pure color, or described by its name, such as red, green or blue. Saturation: intensity of a specific color Contrast: the difference in color and light between parts of an image Sharpness: the sharpness of camera image...
Page 21
The 5 correlates are referring image appearance in terms of color/vision. These are adjustable from this page. Rotation: rotate the image, so it looks up-side down. This can be applied when camera unit must be ceiling mounted and the image is therefore reversed. Audio Setting: enable this option, so the video stream will be transferring accompanied with the audio data.
Advanced White balance: the adjustment to compensate for different environments in terms of light source. Exposure: Anti-flicker setting for image sensor to fit the frequency of light (power) source. For instance, the power frequency is 50Hz for most European countries, while 60Hz is typically for US. This setting is therefore regionally different.
display color image even in a low light environment. Backlight compensation is video gain done manually to correct the exposure of Back Light Compensation: subjects that are in front of a bright light source Video External Output Format: the format of composite output, NTSC/PAL. 4.
Event Server Click on the [Add FTP] to expand FTP server setting FTP Server: Name: Give a name for the FTP server Network Address: Input the network address of the FTP server Upload Path: Choose the desired upload path for events ...
Page 25
Click [Remove] to delete selected event servers (circled in blue)
Motion Detection A snapshot image shows the whole view of the camera covered. To select a motion detection area, click directly on the image, then change the size and position by dragging and drawing. Up to 10 motion areas (configurations) can be added in the list. Each detection area can be set with its own sensitivity value.
Page 27
To add a motion detection area: 1. Click on [Add] to set up a detection area (Set up panel will be expanded) 2. Give a name to this window area 3. Select the trigger level and sensitivity for this detection window (0~100, low~high) 4.
Note: Maximum number of detection window is 10 I/O Ports This model supports 1 photo-coupled relay inputs and 1 relay outputs, see “I/O Terminal Connectors” for detail pin description and application. The tab shows the status of them; with external trigger/alarm devices. Input Ports Setting 1 ...
Output Ports Setting: Name: The name of relay output Current State: Current Output state Event Configuration The Event Configuration is to assign the actions responding to the specified events (Trigger Conditions). The table lists the configured events. Click on “Add…” or choose an event from the list to expend the panel for detail configurations.
Page 30
1. To add an event trigger, click on [Add] and setup panel will be expanded. 2. Give a name to this event. 3. Set the time interval between each trigger. 4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”. During time frame: Choose a day and the starting time then configure the duration time (168hrs = 24x7).
5. Network The IP Camera acts as one of the network devices. It is therefore allowed “IP” to be assigned, so certain network functionalities can be implementable within this device. This section describes these configurations. Fundamentally, for instance, the IP assignment of the device can be done via DHCP server, manually fixed IP option or PPPoE to obtain IP from service provider.
Advanced Enable or configure other network functions. Enable or configure other network functions. NTP: Configure a NTP (Network Time Protocol) server, so that the device system date and time can be synchronized with a specified Time Server. This configuration is provided for one of the position of system date/time adjustment.
Router. Note: with UPnP enabled, the IP Sharing device (Router) capable of UPnP function will automatically be noticed with the device’s NAT port. SMTP (E-Mail) Configure an email host in the device that will send email on behalf of the configured email account in a circumstance like sending an email notice to a specified mail address (Event Configuration).
DDNS Dynamic DNS configuration; the network device can be assigned with a host name by registering this service (Internet access required). Host Name: Assigned name that will be used for access to the device User Name/Password: Account authentication for logging to this service Update Time: Periodically, the device updates its access info to sever in the configured time.
User Login users for Web access and operations; authentication required. The Check box is for anonymous logging on to the live view page. Logging for further configurations will still require user name and password. Follow the conditions shown to add different users with different authority. The default username and password is admin/admin respectively.
Server Maintenance This page provides tool for system maintenance; Reboot and Load default settings, as well as functionalities of launching upgrade process, backup/restore user settings and language defines.
7. Customize This page provides the function of adjusting the look of live view page. There are two types of layout settings; use default look or use custom settings. Use Default Look: the default layout of live/configuration pages Use Defined Links: Web link(s) will be presented on the live page when enabled. It can be a link to another IP camera for instance, or other preferred web link.
Page 41
Use Custom Settings: The modifications allowed are change of Background / Text Color, Background picture, Title, Description, Logo and etc.
I/O Terminal Connector - Pin Assignment Function COMMON RELAY_NO DGND DIGI input DGND Load default Restore Factory Default To restore factory default, please follow the steps: Unplug the power jack to turn off the camera Short pin 5 and pin 6 with a wire Plug in the power jack to turn on the camera.