Table of Contents
Advertisement
3
Set the intermission.
1, 5
4
1 Set the position where you want to insert the
intermission.
Using the operation buttons, play back the CPL
and tap [Set Stop Point] at the position you want
to add the intermission. Similarly, tap [Set Restart
Point] where you want to restart playback.
The set time will be entered in 2 [Stop Point] and
[Restart Point].
For an explanation of how to use the control
buttons, see "CPL Playback Operations"
(page 20).
2 Adjust the time as required.
3 Tap [Select Interval SPL] and select the SPL to
play during the interval period (Interval SPL).
4 Specify the interval period.
5 Using the control buttons, play back the CPL to
confirm intermission operation.
6 Tap [Apply].
The intermission will be set.
Note
Only one intermission can be set per SPL.
Triggering SPL Playback Using GPI
Signals
You can use a GPI signal as a trigger to start playing back
an SPL.
1
Tap [GPI Triggered] in the [SPL] tab.
The "GPI Triggered" screen will be displayed.
24
Creating an SPL
Elapsed time
(current position)
6
2
Select the GPI signal, and then tap [Edit].
2
3
The "Edit GPI-triggered SPL" screen will be
displayed.
3
Specify the duration for which playback is enabled.
2
1 Select the SPL for which to start playback.
2 Determine the duration for which this playback
will be enabled, and change the start and end
dates.
3 Tap [Apply].
Note
[Details] to display detailed information on the
selected SPL.
3
1
Hide quick links:
Advertisement
Table of Contents
