Playing Back A Spl; Selecting An Spl; Spl Playback Operations; Creating A Schedule - Sony SRX-R510P Operating Instructions Manual

Playing Back a SPL

Play back a created SPL.
This section describes steps for manual playback of SPLs.
For instructions on how to create a screening schedule,
see "Creating a Schedule" (page 25).

Selecting an SPL

Notes
• When in Schedule Playback mode, tap [Scheduled] or
[Manual] (the display will change) to set to Manual
mode, or select the [Play Manually] check box. [Play
Manually] is convenient for temporary playback of tests
while in Schedule Playback mode.
• When [Play Manually] is selected and the manual
playback and scheduled playback overlap, the content
played back last will take priority.
Select an SPL for playback in the [Status] tab's
"Auditorium" screen.
Operations are the same as for selecting a CPL.
See "Selecting a CPL" (page 19).

SPL Playback Operations

Using buttons in the "Auditorium" screen, SPLs can be
played back, paused, or cued to a certain position.
Operations are the same as for CPL playback.
See "CPL Playback Operations" (page 20).
To check the detailed information of an SPL
In the "Auditorium" screen, tap [SPL Detail] to check
detailed information on the currently loaded SPL.

Creating a Schedule

The schedule is a function that allows you to automatically
play back an SPL at a set time.
Note
For scheduled playback, it is necessary to tap [Scheduled]
/ [Manual] (the display will change) in [Status] tab's
[Auditorium] and select [Scheduled].
Creating a Schedule
1
Tap the [Schedule] tab.
The "Schedule" screen will be displayed.
2
Tap [New].
The schedule setting screen will be displayed.
3
Set the schedule.
4 2
1 5
1 Select the SPL from the SPL list that you want to
set to the schedule.
To check detailed information on the SPL, select
an SPL and tap [Detail].
Playing Back a SPL / Creating a Schedule
3
25